Welded Box Beam Roll Forming Machine Galvanized Steel Thickness 1.5mm 2mm
The box beams(box beam roll forming machine) not only make the shelves themselves of better quality, but also have the following advantages.
(1) Compared to C-beams(box beam roll forming machine), welded beams(box beam rollformer) are more robust and have a stronger load-bearing capacity.
(2) The use of closed beams makes it much easier to clean and maintain.
(3) It gives the storage shelves a more aesthetic appearance.
Therefore, the box beams(box beam bending machine) make the storage shelves more beautiful, strong and durable, driving a new era of storage shelves.
The box beam(box beam roll forming machine) is made of two pieces of material that are rolled into one and welded together in a closed weld. Compared to the P-beam(step beam roll forming machine), the box beam(box beam roll forming machine) has a higher load-bearing capacity and is more robust; the P-beam(step beam rollformer) is laid on a P-shaped ladder, but the welded beam can be laid on a steel laminate in two ways, the first way: welding L-shaped angles on one side of the beam and laying the laminate on the L-shaped ladder, and the second way: adding a welded moment pipe or angle limit block to the laminate, which is stuck on the beam.
Flow chart:
Manual decoiler--Guiding--Roll forming machine--Hydraulic cut--Out table
In Chile, customers produce C-shaped beams, by welding two C-shaped beams to make shelf beams. This line has a pagoda construction, chain drive and a 15kw forming motor, which is also perfectly adequate for a 2mm C-shape. This is also a way of producing box beams, depending on the popularity of each country's market.
Picture of components:
Manual decoiler
Box beam roll forming machine
Product Tags:
|
|
Galvanized Steel 1.5mm 2mm Frame Roll Forming Machine Welded Box Beam Images
|
